Hi-Tune Mechanical • Relief Valve Kits

Precision.
Protection.
Performance.

Pre-set, bench-tested relief valve kits for major mining excavators and shovels.

Adjusting relief valves via live testing of the machine can be dangerous and uncontrolled as there are too many variables at play.

Using our pre-set relief valve kits eliminates live testing on site and removes maintainers from the line of fire. The relief valves are set in a controlled and purpose-built facility.

About Our Kits

Pre-set relief valve kits

Our relief valve kits are prepared to simplify shutdown planning and replacement of critical hydraulic protection components on large mining excavators.

Terex / Bucyrus • Caterpillar • Hitachi • Liebherr

SupplyBrand newReturn coreNot requiredVerificationTested twice

Brand-new valves. No compulsory core returns.

Pre-set and tested in a purpose-built facility, with no live machine setting required for the supplied valves.

Each valve is set using a large hydraulic power unit with high flow-rate and pressure capability. This lets us replicate actual machine operating conditions as closely as practical during setting and testing.

Our pre-set relief valve kits are prepared in a controlled, purpose-built facility. They eliminate the need to set the supplied valves through live machine testing on site, helping remove maintainers from the line of fire.

01

Tested & Calibrated

Every relief valve is verified twice under controlled conditions.

02

Brand New Valves

No core returns are required.

03

Safer Installation

No live machine testing or line-of-fire exposure.

Our Testing Process

Set and verified under controlled conditions

Each valve is adjusted with the aid of a high-accuracy data logger so critical hydraulic parameters can be observed and recorded during setting and verification.

It also allows us to achieve the setting using a live graph that captures exact crack pressures. Using standard gauges, the pressure change is too quick for the human eye to capture the true setting, and digital gauges have too much lag.

01

Seal Test

Valves are wound up to maximum specification. Any valve that fails is put aside and not supplied.

02

Precision Setting

Pressure, flow and temperature are monitored while the valve is adjusted to the required specification.

03

Double Verification

Every valve is tested twice to verify precision and consistency before dispatch.

04

Torque & Identification

Valves are torque-checked and colour coded to help prevent incorrect installation.

Data Recorded

Delivery Flow RateTemperatureCrack PressureHold PressureReturn PressureReturn Flow
Pressure verification exampleCaterpillar 6060 Travel Secondary Relief ValveOEM specification: 390 bar
Recorded points
Representative pressure verification profileInteractive pressure over time chart based on the supplied data-logger capture, including recorded points at 18 and 56 seconds.
Recorded point390.04 bar20 seconds

Representative trace of the supplied logger image. The labelled readings are 390.04 bar at 20 seconds and 390.16 bar at 56 seconds. The intermediate curve and Set point B are illustrative, not a raw data export. Final records and settings remain valve- and machine-specific.

Preventative Maintenance

Replace relief valves on a planned PM grid

Relief valves are high-cycle pressure-control components. Internal wear can develop gradually and may not be visible during routine external inspections.

Hours-based replacement helps prevent performance loss, excess heat and secondary hydraulic damage before the condition becomes operationally significant.

Effects of heavily worn relief valves

  • Reduced breakout force and digging performance
  • Slow or inconsistent hydraulic response
  • Increased fuel consumption and oil temperature
  • Attachment drift and uncontrolled movement
  • Premature wear of control valve bodies and housings

Planned replacement reduces risk

Planned downtime, predictable parts availability and consistent machine performance. Intervals should account for duty, operating conditions, oil cleanliness and component history.

Machine Range

Relief valve kits by machine range

Start with the manufacturer and machine model. Hi-Tune specialises in relief valve kits, with other supported hydraulic components available through the same enquiry.

Have multiple machines on site that require relief valve kits?

Speak to us about our fleet discount pricing for multiple kits.

Terex / Bucyrus

Mining Excavators & Shovels

  • Relief valve kits
Other parts & components
  • Various pumps
  • Various motors
  • Large range of Rexroth, Hydac & Hydraforce valves
  • Grease injectors & distribution blocks
  • Contamination sensors
  • Proxy switches
  • Temperature sensors
Select machine models

Caterpillar

Mining Excavators & Shovels

  • Relief valve kits
Other parts & components
  • Various pumps
  • Various motors
  • Large range of Rexroth, Hydac & Hydraforce valves
  • Grease injectors & distribution blocks
  • Contamination sensors
  • Proxy switches
  • Temperature sensors
Select machine models

Hitachi

Mining Excavators & Shovels

  • Relief valve kits
Other parts & components
  • Main pumps
  • Fan pumps
  • Swing motors
  • Fan Motors
  • Make up Valves
  • Main control valves
  • Contamination sensors
  • Pump regulators
  • Grease injectors
  • Proxy switches
  • Grease pumps
Select machine models

Our wider capabilities

More than relief valve kits

Specialist labour, precision component repairs and engineered modifications for the demanding conditions of the mining industry.

01

Mining field services & labour

Specialist technical support, hydraulic tuning and skilled labour for mining excavators and hydraulic shovels.

02

In-house workshop

Hydraulic component testing, rebuilds and repairs, hose manufacture and fabrication to support field operations.

03

Engineering & machine improvements

Practical R&D and modifications focused on safety, reliability, performance and increased component life.

Why Hi-Tune

Mining experience. Practical solutions.

Backed by decades of combined OEM and heavy mining experience, with a focus on quality workmanship, safety and reliability.

Cairns workshop & field base

Component workshop and field-service support based in Cairns, Queensland.

Supporting QLD, NT & WA

Technical capability supporting mine sites across Queensland, the Northern Territory and Western Australia.

Safety through experience

Methodical maintenance, diagnostics and repairs that help reduce unnecessary exposure to high-risk environments.

Customer feedback

Customer Reviews

Layout preview: these testimonials are placeholders, not customer endorsements. Approved feedback, names and company details will replace them.

Placeholder testimonial

Customer review

Approved customer feedback will appear here. This is placeholder text for layout review, not a real customer testimonial.
Placeholder image — approved customer image to be supplied
Customer name — placeholder
Company / role — placeholder

Placeholder testimonial

Customer review

Approved customer feedback will appear here. This is placeholder text for layout review, not a real customer testimonial.
Placeholder image — approved customer image to be supplied
Customer name — placeholder
Company / role — placeholder

Placeholder testimonial

Customer review

Approved customer feedback will appear here. This is placeholder text for layout review, not a real customer testimonial.
Placeholder image — approved customer image to be supplied
Customer name — placeholder
Company / role — placeholder

Work in practice

Case studies and reliability modifications

Project stories from our workshop, field services and engineering work.

FitmentMachine-specific confirmationFleet supportMulti-model enquiriesRelief valve kitsRecorded verificationSupportDirect Hi-Tune contact

Relief valve kit enquiries

Find the right kit for each machine

Select one or more models across your fleet and describe the relief valve kit required. Other hydraulic component requirements can be included in the same enquiry.